Remote Sensing and control
Copyright © 1995 - 2018 Stedham Electronics Corporation,  All Rights Reserved

Copyright © 1995 - 2018 Stedham Electronics Corporation,  All Rights Reserved

Remote Sensor Module

  • Up to 4 sensor modules
  • Any Normally Open, PNP (sourcing) output sensor my be used
  • 5VDC wall transformer power supply
  • XBee Pro wireless 2.4GHz RF transceiver module included (up to 1 mile line of sight range and ~300ft indoor range)
  • Two levels of security for safe communication with Process Control Module
  • Power on LED indicator
  • Sensor signal LED indicator

Process Control Module

  • Up to 4 relay outputs (N.O./N.C.)
  • 10A 240VAC relay contacts
  • XBee Pro wireless 2.4GHz RF transceiver module included (up to 1 mile line of sight range and ~300ft indoor range)
  • Power on LED indicator
  • Radio receiving LED indicators
  • Relay energized LED indicators

Applications

Remote Sensor Module

Process Control module

Remote Sensing and control

Applications

Remote Sensor Module

Process Control module

Remote Sensing and control

Applications

Remote Sensor Module

Gallery

Process Control Module Gallery

Back
Next
Back
Next

Copyright © 1995 - 2018 Stedham Electronics Corporation,  All Rights Reserved

4 Sensors/4 Sensor Modules/Single Relay Module

When wiring sensors to a single location is difficult or costly the sensors, each sensor can have it's own Remote Sensor Module.  Sensing multiple liquid levels, bin levels, container filling, leak detection, flow, proximity detection, switches or any combination is possible.

The Process Control Module has up to 4 corresponding relay outputs (sensor Module #1 triggers relay #1). Normally Open and/or Normally Closed 10A relay contacts can be used for process control, feed directly into PLC's, trigger alarms, etc.

They are setup at the factory so all you have to do is install, connect the wiring, and watch it work!

Order up to 4 Remote Sensor Modules, each with 1 sensor input, all including one Process Control Module with 4 corresponding relay outputs, enclosures, and power supplies (sensors not included).
2 Remote Sensor Modules
3 Remote Sensor Modules
4 Remote Sensor Modules
PN 0530106
PN 0530107
PN 0530108
$452.24
$589.98
$727.72
When wiring sensors to a single location is difficult or costly the sensors, each sensor can have it's own Remote Sensor Module.  Sensing multiple liquid levels, bin levels, container filling, leak detection, flow, proximity detection, switches or any combination is possible.

The Process Control Module has up to 4 corresponding relay outputs (sensor Module #1 triggers relay #1). Normally Open and/or Normally Closed 10A relay contacts can be used for process control, feed directly into PLC's, trigger alarms, etc.

They are setup at the factory so all you have to do is install, connect the wiring, and watch it work!

  • Up to 4 sensor modules
  • Any Normally Open, PNP (sourcing) output sensor my be used
  • 5VDC wall transformer power supply
  • XBee Pro wireless 2.4GHz RF transceiver module included (up to 1 mile line of sight range and ~300ft indoor range)
  • Two levels of security for safe communication with Process Control Module
  • Power on LED indicator
  • Sensor signal LED indicator
Back
Next
  • Up to 4 relay outputs (N.O./N.C.)
  • 10A 240VAC relay contacts
  • XBee Pro wireless 2.4GHz RF transceiver module included (up to 1 mile line of sight range and ~300ft indoor range)
  • Power on LED indicator
  • Radio receiving LED indicators
  • Relay energized LED indicators
Back
Next
Order up to 4 Remote Sensor Modules, each with 1 sensor input, all including one Process Control Module with 4 corresponding relay outputs, enclosures, and power supplies (sensors not included).
2 Remote Sensor Modules
3 Remote Sensor Modules
4 Remote Sensor Modules
PN 0530106
PN 0530107
PN 0530108
$452.24
$589.98
$727.72
When wiring sensors to a single location is difficult or costly the sensors, each sensor can have it's own Remote Sensor Module.  Sensing multiple liquid levels, bin levels, container filling, leak detection, flow, proximity detection, switches or any combination is possible.

The Process Control Module has up to 4 corresponding relay outputs (sensor Module #1 triggers relay #1). Normally Open and/or Normally Closed 10A relay contacts can be used for process control, feed directly into PLC's, trigger alarms, etc.

They are setup at the factory so all you have to do is install, connect the wiring, and watch it work!

  • Up to 4 sensor modules
  • Any Normally Open, PNP (sourcing) output sensor my be used
  • 5VDC wall transformer power supply
  • XBee Pro wireless 2.4GHz RF transceiver module included (up to 1 mile line of sight range and ~300ft indoor range)
  • Two levels of security for safe communication with Process Control Module
  • Power on LED indicator
  • Sensor signal LED indicator
Back
Next
  • Up to 4 relay outputs (N.O./N.C.)
  • 10A 240VAC relay contacts
  • XBee Pro wireless 2.4GHz RF transceiver module included (up to 1 mile line of sight range and ~300ft indoor range)
  • Power on LED indicator
  • Radio receiving LED indicators
  • Relay energized LED indicators
Back
Next
Order up to 4 Remote Sensor Modules, each with 1 sensor input, all including one Process Control Module with 4 corresponding relay outputs, enclosures, and power supplies (sensors not included).
2 Remote Sensor Modules
3 Remote Sensor Modules
4 Remote Sensor Modules
PN 0530106
PN 0530107
PN 0530108
$452.24
$589.98
$727.72