Remote Sensing and control
Copyright © 1995 - 2018 Stedham Electronics Corporation, All Rights Reserved
Copyright © 1995 - 2018 Stedham Electronics Corporation, All Rights Reserved
Remote Sensor Module
- Up to 4 sensor inputs
- Any Normally Open, PNP (sourcing) output sensor may be used
- 5VDC wall transformer power supply
- XBee Pro wireless 2.4GHz RF transceiver module included (up to 1 mile line of sight range and ~300ft indoor range)
- Two levels of security for safe communication with Process Control Module
- Power on LED indicator
- Sensor signal LED indicator
- Up to 4 relay outputs (N.O./N.C.)
- 10A 240VAC relay contacts
- XBee Pro wireless 2.4GHz RF transceiver module included (up to 1 mile line of sight range and ~300ft indoor range)
- Power on LED indicator
- Radio receiving LED indicators
- Relay energized LED indicators
Applications
This Remote Sensor Module has four sensor inputs for sensing multiple liquid levels, bin levels, container filling, leak detection, flow, proximity detection, switches or any combination. It is used best when the sensors are in close proximity to one another allowing them to be easily connected to the unit.
The Process Control Module has 4 corresponding relay outputs (sensor #1 triggers relay #1). Normally Open and/or Normally Closed 10A relay contacts can be used for process control, feed directly into PLC's, trigger alarms, etc.
They are setup at the factory so all you have to do is install, connect the wiring, and watch it work!
Remote Sensor Module
Process Control module
Remote Sensing and control
Applications
Remote Sensor Module
Process Control module
Remote Sensing and control
Applications
Includes one Remote Sensor Module with 4 sensor inputs, one Process Control Module with 4 corresponding relay outputs, enclosures, and power supplies (sensors not included).
PN 0530102 $327.46
Copyright © 1995 - 2018 Stedham Electronics Corporation, All Rights Reserved
Single Remote Sensing Module (w/4 inputs)
Single Process Control Module (w/4 outputs)
Process Control Module
This Remote Sensor Module has four sensor inputs for sensing multiple liquid levels, bin levels, container filling, leak detection, flow, proximity detection, switches or any combination. It is used best when the sensors are in close proximity to one another allowing them to be easily connected to the unit.
The Process Control Module has 4 corresponding relay outputs (sensor #1 triggers relay #1). Normally Open and/or Normally Closed 10A relay contacts can be used for process control, feed directly into PLC's, trigger alarms, etc.
They are setup at the factory so all you have to do is install, connect the wiring, and watch it work!
- Up to 4 sensor inputs
- Any Normally Open, PNP (sourcing) output sensor may be used
- 5VDC wall transformer power supply
- XBee Pro wireless 2.4GHz RF transceiver module included (up to 1 mile line of sight range and ~300ft indoor range)
- Two levels of security for safe communication with Process Control Module
- Power on LED indicator
- Sensor signal LED indicator
- Up to 4 relay outputs (N.O./N.C.)
- 10A 240VAC relay contacts
- XBee Pro wireless 2.4GHz RF transceiver module included (up to 1 mile line of sight range and ~300ft indoor range)
- Power on LED indicator
- Radio receiving LED indicators
- Relay energized LED indicators
Includes one Remote Sensor Module with 4 sensor inputs, one Process Control Module with 4 corresponding relay outputs, enclosures, and power supplies (sensors not included).
PN 0530102 $327.46
This Remote Sensor Module has four sensor inputs for sensing multiple liquid levels, bin levels, container filling, leak detection, flow, proximity detection, switches or any combination. It is used best when the sensors are in close proximity to one another allowing them to be easily connected to the unit.
The Process Control Module has 4 corresponding relay outputs (sensor #1 triggers relay #1). Normally Open and/or Normally Closed 10A relay contacts can be used for process control, feed directly into PLC's, trigger alarms, etc.
They are setup at the factory so all you have to do is install, connect the wiring, and watch it work!
- Up to 4 sensor inputs
- Any Normally Open, PNP (sourcing) output sensor may be used
- 5VDC wall transformer power supply
- XBee Pro wireless 2.4GHz RF transceiver module included (up to 1 mile line of sight range and ~300ft indoor range)
- Two levels of security for safe communication with Process Control Module
- Power on LED indicator
- Sensor signal LED indicator
- Up to 4 relay outputs (N.O./N.C.)
- 10A 240VAC relay contacts
- XBee Pro wireless 2.4GHz RF transceiver module included (up to 1 mile line of sight range and ~300ft indoor range)
- Power on LED indicator
- Radio receiving LED indicators
- Relay energized LED indicators
Includes one Remote Sensor Module with 4 sensor inputs, one Process Control Module with 4 corresponding relay outputs, enclosures, and power supplies (sensors not included).
PN 0530102 $327.46
